9 Things Your Parents Taught You About Replacement Double Glazed Windows

Is It Time For Replacement Double Glazed Windows?

Replace your windows to boost your home's energy efficiency. These windows are modern and feature uPVC or aluminum frames that help to trap heat inside your home.

If you've noticed condensation, draughts, or leaks around the window frames, it may be time to replace your double glazing. Find a local FENSA approved installer to start.

1. Excessive Condensation

Double glazing is a great method of keeping heat in your home and cut down on costs for energy. If the condensation is too high and you are not aware of signs that your windows may need to be replaced. This can cause many issues such as mildew and mould.

Condensation occurs when warm moist air comes into contact with the cold surface. You may have seen it at home when you woke up to discover your glasses covered by a film of water, or outside where temperatures dropped below dew point.

This is often due to an increase in humidity inside when the outside temperature decreases. If your home is too hot and you open the windows while showering or cooking, moisture can form inside your windows.

The plaster exposed near the window usually develop external condensation. It's not as horrendous as it sounds, because the heat of the sun and the air movement tend to dry it up. It's worth looking at specialist glass that can prevent the formation of condensation. For example, Pilkington's ActivTM Self-Cleaning glass, which has a hydrophilic coating that wards off moisture and minimizes condensation.

If you have internal condensation between your window panes, it's likely that the seal on the window has failed. The window will have to be replaced. It could also be permitting heat to escape, which is why it's important to have the issue investigated by an expert.

2. Wear and tear signs

Your windows don't speak but they will try to send you signals that something isn't right. If you notice signs such as condensation, draughts or cracks, it may be time to replace your double glazing.

Modern uPVC Windows are designed to cut down on energy bills and also provide insulation. They help keep the heat out in summer and prevent warm air from escaping during winter, saving you money on cooling and heating costs. Even energy efficient double-glazed windows will require replacement in the future, since their lifespan is limited.

The most typical sign that your double glazed windows are wearing out is condensation. The condensation typically occurs between two glass surfaces and can be a sign that the seal is failing or that your windows might not be as efficient as they once were.

Another indication is that windows are sweating from the inside. This happens when the temperature of your home falls below the dew point, causing water vapour to condense on the the window panes. This can be caused by leaks or seals.

If your windows are showing signs of wear and tear, it's best to hire an expert to replace them. This is a job that shouldn't be attempted as a DIY project as it is dangerous and can result in broken glass. Instead, hire a company that specialises in installing double glazed windows, since they have the right tools and safety equipment to complete the job quickly and efficiently. In addition, they will be in a position to offer information on the various types of double glazed windows that are available and which ones are best for your home.

3. Unsealed Windows

double glazed replacement windows-glazed windows are made of two panes and a spacer between them. This creates an insulating layer to prevent your warm air escaping and cold air from outside coming in. In contrast to single pane windows double-glazed windows provide greater insulation and can drastically reduce energy costs by keeping your home warm for longer.

In a window made of sealed glass the space between the two panes is filled with inert gasses such as argon xenon or Krypton. These gases slow down the transfer of heat through the window which makes it more energy efficient and reducing your heating costs. As time passes, the seal between glass may break, allowing air to enter, decreasing its insulation properties.

Foggy windows are another sign that the window seal has failed and allows water to get in. As the weather changes, fogginess typically disappears. However, you might still feel draughts.

A weak seal on your windows can also let pests such as ants, cockroaches, centipedes and mosquitoes into your home. It also allows pollen and dirt into your home, which can trigger indoor allergies. Additionally, a solid window seal can reduce noise from the street and other sources.

If you're not sure if your seal is damaged check it as soon as you can. A professional will know how to replace the damaged IGU, and then repair it. They will usually disassemble the sash of your window, then remove the existing IGU unit and install the new one. If the IGU is under warranty, it will be covered by your contractor or manufacturer. If you do not have a replacement window seals, you'll need to cover your windows.

4. Faulty Windows

Double-glazed windows can help you save energy costs. They let in more light and block out outside noises, while also keeping your home insulated. But, if they're not working properly, it could cause drafts and moisture in the home. To avoid leaks and other damage, it's important to repair these windows or replace them as soon as you can.

The most obvious indication that your double glazed windows are no longer sealed correctly is the emergence of condensation. The space between the panes develops a fogginess which cannot be removed from either side. The issue is that the seal around the panes has been breached which allows air or gas such as argon and Krypton to escape, creating an unwelcoming atmosphere inside your home.

Another sign that your windows are no longer working as they should is an increase in your utility bills. The windows are designed so that warm air cannot escape and cold air is unable to be able to enter. Any increase in your utility bills is a good indication that it's time to replace your double glazing.

Windows that fail are typically due to a poor installation job. Installing a window requires precision, skill and experience. Homeowners should not attempt to do it themselves. Windows that are poorly installed could cause mold growth, water leaks and replacement double glazed windows even leaks. Window failures that are premature can result from improper maintenance and cleaning of the windows. This is due to the use of harsh chemicals and power washers that can cause damage to seals, frames and even glass. It is recommended to replace your windows with a reliable company to avoid these issues and to ensure they continue to perform for a long time.

5. The cost of energy is increasing

It is crucial to use energy efficiently in order to avoid overusing it. The windows of a home are a major element in the overall energy efficiency of a property. If your energy bills are rising, it could be time to replace your double-glazed windows.

Old windows with draughts and leaks can significantly increase your energy bills. They let cold air in the home, and may even cause loss of heat. However, replacement double glazed windows with a window conversion and the use of more modern technology, you can get rid of these issues and have an energy efficient home throughout the year.

Double-glazed windows can help keep your home warm during winter by trapping warm air while keeping out cold air. This helps reduce the dependence on central heating, and can make your home economical, especially located in an area that is crowded and heating costs have increased.

Double glazing can also be an asset during warmer months as it prevents excess heat from being trapped inside of your home. This means that you can rely less on electric heaters and air conditioning which will reduce your energy bills and the impact on the environment.

Double-glazed retrofit windows are an excellent option for homeowners who wish to save on their energy bills but don't have the funds to replace all their windows. The installation process is faster and requires far less materials as the existing frame and sash remain intact. This also lets the homeowner pick their preferred style of window but still benefit from the insulation provided by the highest-quality IGU. The new glass can also be filled with argon to increase efficiency of energy.