Many Of The Common Errors People Make With Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they are not susceptible to get rusty or decay.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will help avoid unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause serious damage to your home and may even be fatal. It is important to make sure that your windows are in good working order.

For single pane windows it is fairly easy to replace them, and the new window will generally fit within the frame of the previous one easily. If you have double-paned windows which are joined by internal beading, it is harder to remove and replace the old panes. In this case, it is necessary to buy plastic spacers to aid in fitting the new pane into the window frame.

Wearing protective eyewear and thick gloves is a must if you plan to remove the glass by yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes, so that any shards of glass fall onto the fabric, not onto the floor which could cause them to be trampled under.

Once the glass has been removed and the glass is removed, it's a good idea to cover the gap with packaging tape or duct tape to stop water and Upvc window repair drafts from entering the home until a professional is able to come out and repair the window. This will also act as a barrier, preventing any intruders from gaining entry to your home. If the distance between the window and the door is substantial, you may need to consider a security screen that also has an opening. This will provide the best of both.

2. Sagging

uPVC windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows with sash. However, over time they may be afflicted by a variety of issues, including sliding. A sagging uPVC windows can cause problems with light, upvc window repair draughts and even security. It is crucial to act when you notice your uPVC windows are sliding.

Repositioning the hinges can aid in fixing a window that is sagging. You'll first need to open the windows so you can get at the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver, and then adjust them counter-clockwise or clockwise. Close your window to test the fit after you have moved your hinges. If you're happy with the fit, tighten the screws to ensure that they stay in place.

If you are unable to reposition the hinges, you could have to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, causing them to loose their elasticity. If this happens, it's crucial to replace the seal as quickly as possible so that your Upvc window Repair windows remain watertight and draught-proof.

uPVC handles may also loosen up. Often it is due to screws that have become loose over time. However, it can occur because the handle mechanism has been worn out. It's relatively simple to fix a loose uPVC hand. First, you'll need to shut the window and do a test fitting. The corners of the sash need to be aligned with the casing joint. If it isn't, you can use a screwdriver or a wrench to loosen the handle and then reverse the mechanism back into its original position.

3. Water Leaks

If you're waking up to damp floors and mouldy walls every time it rains it's important to take action. Leaks of water from windows can cause structural damage to your home and affect your ability to regulate the temperature inside your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is an easy fix that can be accomplished by any DIYer who has the ability. Depending on how severe the problem is, the old caulking might need to be removed. It is essential to keep in mind that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk and then make the area harder to clean and decrease the efficiency of your energy usage.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window. In more serious instances, you may need to replace the window.

Mold spots and rotted sills are other signs of water leakage. The mold thrives in damp environments and can quickly spread throughout the house.

If the leakage is occurring between the double-glazed window, it is more likely that the issue is more with the seal than the frame. Again this can easily be repaired by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open, or if it opens with a breeze. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that use hinges and like any mechanical part they can wear down over time. It's very simple to change the hinges on a window however it is easier if someone helps you to hold the frame.

Make sure that the uPVC hinges are open and closed in the right direction. You can check this by looking for the arrow on each hinge, this indicates the direction in which the window should open.

The issue can be caused by opening the window incorrectly or due to a poor installation in the factory. Sending us photos via our website will often solve the issue. We are happy to provide advice.

It is also crucial to ensure that the hinges are lubricated regularly. Applying an engineering lubricant that is light to the hinges is a great method of doing this. We recommend using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also helps prevent corrosion and decrease the chance of sticking. The ideal time to do this at least once a year. WD40 and other solvent-based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a few different factors. Firstly the hinges, again due to wear and tear could become misaligned. This causes gaps to develop where the sash meets the frame. These can be easily repaired by giving them a good cleaning, but if they are beyond repair it may be necessary to have them re-aligned or replaced. The interlock may also become misaligned. It is located on the hinge's side and could require to be cleaned. In certain instances it is possible to replace them.

These seals are susceptible to wear and tear or be damaged over time, allowing air escape. Replacing these with high-quality weatherstripping can help stop draughts. Replace the windows made of upvc with low-emissivity glass. This will help to regulate indoor temperatures and decrease the risk of draughts.

The last way to reduce draughts effectively is by using a Draught-exclusion device. These are typically fabric tubes filled with a filler that can be put on top of your window sill. These will help to keep cold air out and keep your home warm and cosy!

Your upvc windows can keep providing excellent insulation and security for your home by performing regular maintenance and repairs. However, it is important to recognize that windows last for a certain period of time and there may come the point when it's more efficient to replace them than fix them. If you are experiencing issues with your upvc window, it's best to consult a professional immediately.