Repairs To Upvc Windows: It s Not As Difficult As You Think

Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to rot or rust like aluminum and timber.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will help avoid unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge amount of damage to your home, making it very dangerous and potentially fatal. It is crucial to take the time to ensure that you are doing everything you can to ensure that your windows are in good condition.

For single pane windows, it is fairly easy to replace them, and the replacement is usually able to fit into the frame of the previous one easily. However, if you have double-pane windows that are held in place by internal beading it will be more difficult to get rid of the panes that are in place and replace them with new ones. In this instance it is essential to buy plastic spacers to make sure that the new pane fits into the window frame.

Wearing eye protection and thick gloves is a must if you plan to remove the glass yourself. It is also an excellent idea to lay down a drop cloth before you begin working on the glass, so that any shards fall onto the fabric instead of landing on the floor where they can be trampled on and cause further damage.

After the glass has been removed from the window, it's best to seal the gap with clear packaging tape or duct tape to prevent water and drafts from entering the home until a professional is able to come out and fix the window. It also acts as a barrier to prevent any intruders from getting into your home. If the gap is large, you may be interested in an alarm door that comes with an integrated window, as this will offer the best of both worlds.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash windows. However, with time, they may be afflicted by a variety of problems including sliding. A sagging uPVC window can cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it is important to act swiftly to prevent the problem from worsening.

Repositioning the hinges can aid in fixing a window that is sliding. To do this, you'll need to open the window so that you can access the frame. With the screwdriver, you'll be able to remove the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, close your window and verify the fit. If you are happy with the fit of the window, you can tighten screws to keep them in the right position.

If you aren't able to move the hinges, you might need to replace the seal. Over time, rubber seals lose their elasticity and dry out which causes them to lose tightness. It is essential to replace your seal as quickly as you can in order to keep your uPVC window watertight and draughtproof.

UPVC handles can also loosen up. Most often, this is caused by screws that have come loose over time. However, it can also happen because the handle mechanism has been worn out. It's a good thing that it's simple to repair the handle of a window that is loose yourself. You'll first need to close the window and do a test fitting. The joints at the corners of the sash should align with the joint on the casing. If it doesn't, you can use a screwdriver or a wrench to loosen the handle, and then turn the mechanism back into its original position.

3. Water Leaks

If you wake up to wet floors and damp walls each time it rains it's crucial to take action. Water leaks from windows not only lead to the degrading of the structure of your home but also undermine your efforts to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

It is a fairly easy fix and should be undertaken by any DIY expert. Depending on how serious the issue is, the old caulking may need to be removed. It is important to remember that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk in order to make the area more difficult to clean and could decrease the efficiency of your energy usage.

Verify that the drainage holes do not have debris inside them and ensure that the sill pan is properly angled to allow the water to drain from the window. In more serious cases, you may need to replace the window.

Other indicators of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the wall near the window. The fungus thrives in damp conditions and can spread quickly throughout the house.

If the leakage occurs between the double glazed window repairs-glazed window, it is more likely the issue is with the seal than the frame. Again this can easily be fixed by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open or it opens with an ease. They can be repaired by any skilled DIYer and are usually done within a few minutes.

Like any mechanical part hinges will wear out over time. The process of replacing a hinge on a window is an easy process but it can be simpler with someone else to assist in holding the frame in place.

Verify that the uPVC hinges open and close in the right direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

The problem with the hinges on windows could be the result of incorrectly opening the window in a certain manner or because of inadequate installation at the factory. This can often be resolved by sending us a photo via our website and we will be happy to give you suggestions.

It is also crucial to grease the hinges regularly. This can be done by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It can also lower the risk of a window sticking and prevent corrosion. This must be done at a minimum once a year. WD40 and other solvent based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different causes. The hinges may also become misaligned due to wear, causing gaps where the sash meets frame. This can be easily fixed by giving them a good cleaning, but in the event that they are beyond repair it might be necessary to get them re-aligned or replaced. The second is the interlock, which is on the hinge side of the window, may also become misaligned, again it's possible to just give them a good clean, but in some instances it could be necessary to get them replaced.

These seals can wear down or get damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping can help stop draughts. Another alternative is to replace the window with glass that is low-emissivity, which will help regulate indoor temperatures and again will lessen the risk of draughts.

Another, and most effective ways to cut down on drafts is to use an draught excluder. These are usually fabric tubes which are filled with a sort of filler and Window repairs can be positioned on top of your windowsill. These will help to block out cold air and keep your home warm and cozy!

Your upvc windows can keep providing excellent insulation and security to your home by performing regular maintenance and repairs. However, it is important to realize that all windows have a life span and window repairs eventually, they will reach a point where it is more cost-effective to replace them rather than repair them. If you have any problems with your upvc window you should consult a professional immediately.