Repairs To Upvc Windows Isn t As Difficult As You Think

Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. They don't decay or rust as timber and aluminum.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will help avoid unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great deal of damage to your home, making it very hazardous and possibly fatal. You should take the time to make sure that your windows are in good condition.

For single pane windows it is fairly easy to replace them, and the replacement will generally fit within the old frame very easily. If you have double-paned windows which are held together by internal beading, it is harder to remove and replace the old panes. In this case it is essential to purchase plastic spacers in order to help the new pane fit into the window frame.

Wearing protective eyewear and upvc Window Repairs thick gloves is essential when you are planning to remove the glass yourself. You should also lay down a dropcloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric, not onto the floor and could be trampled under.

It's a great idea seal the gap after the glass is removed. This will stop water and drafts from entering your property until a professional arrives to fix the window. It also acts as a barrier that will prevent any intruders from gaining entry to your home. If the gap is particularly large, you may be interested in a security door that has an integrated window, as this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber sash windows. However, over time, they are susceptible to a range of issues, including sliding. A sagging window can cause problems with light, draughts and even security. It is crucial to act when you notice your uPVC windows are sagging.

To fix a sagging window you can try to reposition the hinges. You'll first need to open the windows to get at the frame. Then, you can remove the hinges on the top and bottom with a screwdriver and adjust them counter-clockwise or clockwise. Close your window to test the fit after you have relocated your hinges. If you're satisfied with the fit, tighten the screws to ensure they stay in place.

If you aren't able to move the hinges, you might require replacing the seal. As time passes, rubber seals lose their elasticity and become dry and cause their tightness to decrease. If this happens, it's crucial to replace the seal as quickly as you can to ensure that your uPVC windows are waterproof and secure from draughts.

uPVC handles could also become loose. Most often it is due to screws that have become loose over time. However, it can be due to the fact that the handle mechanism has been worn out. Luckily, it's not difficult to repair the handle of a window that is loose yourself. First, you'll need to close the window and then perform a test to ensure that it fits. The corner joints of the sash should align with the casing joint. If it isn't, you can make use of a screwdriver to loosen the handle, and then turn the mechanism back into the position it was in.

3. Water Leaks

It is essential to act if you get up each morning to find mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home, and affect your ability to regulate the temperature in your home. The most common cause for leaking uPVC windows is that the sealant around the frame is either damaged or is missing.

This is an easy fix that can be completed by anyone who is a DIYer with the skills. Depending on how serious the issue is, old caulking may have to be removed. It is important to remember that when it comes to uPVC window repairs, do not be tempted to apply too much caulk in order to make the area more difficult to clean and could decrease the efficiency of your energy usage.

Check that any drainage holes have no debris inside them and that the sill pan has been properly angled to allow the water to drain from the window. In more extreme situations, you may have to replace the window.

Other signs of long-term water leakage include decayed sills and the appearance of black spots of mold on the wall near the window. The mold thrives in damp environments and can quickly spread throughout the home.

It is also important to note that if the leak originates from the glass of your double glazed windows, it's more likely to be an issue with the glass seal rather than the frame or sagging. Again this can easily be fixed by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window repair near me is difficult to open or if it blows open with an ease. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Most households in the UK will have top-hung or side hung uPVC windows that are hinged and, just like any mechanical component they are susceptible to wear and tear over time. It is very easy to replace a hinge on a window but it's much easier if someone else helps hold the frame.

Make sure that the uPVC hinges open and close in the correct direction. Look for the arrows on each hinge to determine which way the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window in a particular manner or because of inadequate installation at the factory. This issue can be fixed by sending us a photograph via our website and we will be pleased to offer you suggestions.

It is also important to lubricate the hinges regularly. This can be done by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window operate and close more easily. It also decreases the chance of windows sticking and help prevent corrosion. This should be done at least every year. WD40 and other solvent-based lubricants are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a few different things. The hinges, also due to wear and tear may become displaced, which can cause an opening to appear where the sash meets the frame. If they are beyond repair, it could be required to realign them. In addition, the interlock could also become misaligned. It is located on the hinge side and may need to be cleaned. In some instances it might be necessary to replace the hinges.

The next common reason for draughts are the window seals. They are susceptible to being worn out or damaged over time, and will allow air to escape through the gaps. Replacement of these with high-quality weatherstripping is a good way to stop draughts. Replace the upvc windows with low-emissivity glasses. This will help to regulate indoor temperatures and decrease the possibility of draughts.

Another, and most effective ways to reduce the draughts in your home is to use an draught excluder. These are typically fabric tubes which are filled with a sort of filler and can be put on the top of your windowsill. These will keep your home warm by blocking out cold air.

The windows made of upvc can remain a great source of insulation and security for your home with a little regular maintenance and repairs. It is essential to remember that all windows will eventually become worn out, and it may be more cost-effective to replace them than to repair them. If you are experiencing issues with your Upvc windows, it's recommended to seek assistance from a professional as soon as possible.