Twenty Myths About Window Repair: Busted

Window Repairs

Window repairs can save homeowners money and make their homes comfortable. In the event of severe damage, such as broken glass or a shattered frame, a replacement window may be required.

Many other problems can be fixed to extend the lifespan of windows. Common problems include:

Broken or cracked Panes

Glass that is cracked could be caused by a lawnmower that throws rocks in the wrong direction or the blow of a tree branch by strong winds. This is not only visually bad, but it can cause higher energy bills because the broken pieces allow cold air in to your home. Luckily, it's usually relatively simple to repair windows with broken panes.

Start by carefully removing the glass with gloves and safety glasses. You may have use a utility knife to remove old glazing compound or putty around the frame's edges. Then, clean the glass's surface and the frame's wood with a soft cloth or paper towel.

Once the area is clean and dry, apply a waterproof silicone caulking on the frame's perimeter. This helps prevent water from entering through the crack, which could cause further damage to both the frame and the glass.

A crack that is severe in double-paned glass may affect the gas between the panes, rendering your windows less insulative. If the crack is so severe that it threatens the integrity of the window or if the pane inside is not there it is possible to call a professional.

Cracks in the glass caused by thermal stress may occur when there's a drastic difference in temperature between your home and the outside. This causes the glass to expand and shrink. If the cracks are situated on two sides of a window repair near me it is recommended to replace it rather than try to repair it.

Clear tape can be used to close cracks in windows that are not yet ready for replacement. It also keeps out bugs and cold wind. You can cut a nylon stocking large enough to cover the entire crack and glue it with duct tape. This isn't an indefinite solution, but it's a good way to keep cold air out and insects away from your home. If you notice cracks on the windows of your old ones You should consult the local company to determine if replacing the whole window is a better solution.

Rotten Wood

Wood rot is a frequent problem with windows. It can affect the appearance of a house and can also be danger to your safety. It is possible to fix rotted wood. First, you must determine the root of the wood rot. This can be done by looking for roof leaks or gutters that are not functioning, cracked caulking and any other areas which allow water to penetrate the wood.

Next, you will need to remove any rotten areas of the window frame. This can be accomplished with an axe, a claw hammer or a rasp. After removing the decayed wood, you'll need to replace it with fresh wood. It is recommended to choose treated wood for this project since it is resistant to rot. If you are unable to replace the rotted timber, you can use wood filler and hardener to strengthen the damaged area. This kind of product can be available at most hardware stores. Follow the instructions on the label of the product to ensure the best results.

After you have repaired the damaged areas of the window sill, it's essential to safeguard the area. This can be done by applying an water-resistant wood sealant. A product such as Sikkens is a great choice for home this task.

You can also use an epoxy filler that is two-part to shield the wood from further damage. This product is easy-to-apply and leaves a nice finish. However, it is very important to follow the directions for application on the label. After the epoxy filler has dried, you are able to rub the surface of the wood. Start with a rough sandpaper then move on to an easier grade.

The most important thing you don't want to do is make the area that has been damaged by exposed to more water. It is a good idea, that's why you should protect the surface you have repaired with an oil-based primer which will shield it from water. After that, you can apply the waterproof wood sealant.

The website won't work

A window that won't open could be due to various reasons. The house may have settled, or the wood frames could have warped during humid weather. Someone might have also secured them with a nail for security. However, with a bit of patience and the right tools, most windows that are locked can be opened.

The accumulation of gunk or debris could be the main cause of a window not opening. The buildup of dirt and grime on the sliding tracks, hinges and locks over time, notes Acme Glass. Metal hardware may also rust if it comes in contact with humidity and direct sunlight. Keeping these areas lubricated with spray grease can prevent the oxidation process and ensure that your window is functioning well.

Stuck windows can be the result of a loosening or breakage of the pulleys used to lift and lower the window. These parts can lose their tension and cause obstruction especially if the window is located two or more stories above the ground.

If you are having difficulty opening a door, you can use a pry-bar to gently open the door. Place a block on the frame of the window to give the pry bar more leverage. Be careful not to harm the wood or the window. Try running a hairdryer along the frame's edges for a few minutes. This will warm the wood, making it easier to move.

A damaged spring can be the reason for a window repairs near me that won't raise or lower. You'll need to check the owner's manual for more information depending on who made your windows.

If you've tried cleaning and lubricating the moving parts on your windows, but they cannot open, it may be time to replace the windows. Homespire Windows & Doors offers windows that are energy efficient. Don't let the windows of your home become functional to useless. If your windows aren't properly closed could leave your home vulnerable for water damage and burglary. Contact us for more information about our windows replacement services and products today!